Since Ford trucks are heavy beasts, lifting them would require more than the regular jacks used for sedans and other smaller cars. Whether you ride a Ford F-150 or any of its super duty brothers (F-250, F-350, etc.), you need to invest in a reliable jack that can lift your machine into the air with minimal effort from your end and with no dangerous consequences.
In this post, we’d be reviewing some of the best jacks for Ford F150, F250, F350, and others in the Ford F-series.
- Best Jacks for Ford F-150, F-250 & F-350: Our Top 5 Picks
- 1. Arcan ALJ3T 3-Ton Quick Rise Aluminium Floor Jack
- 2. Pittsburgh Automotive 3-Ton Heavy Duty Floor Jack
- 3. Blackhawk B6350 Fast Lift Service Jack – 3.5 Ton Capacity
- 4. Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
- 5. Arcan 3 Ton Professional Grade Aluminium and Steel Service Jack
Best Jacks for Ford F-150, F-250 & F-350: Our Top 5 Picks
The market is filled with various types and models of jacks by several different brands. And making the right choice for your Ford truck can be a difficult task. But we’ve made things easier for you by scouring the market and comparing several different options that are suitable for Ford trucks.
Here are our top 5 picks.
1. Arcan ALJ3T 3-Ton Quick Rise Aluminium Floor Jack
The Arcan ALJ3T 3 Ton Aluminium Floor Jack is a tool that will assuredly help lift any heavy vehicles due to its 3-ton capacity. Despite its high capacity, the jack boasts an impressive weight of only 56 pounds, thanks to the ultra-light all-aluminum body. It comes with lightening holes in its reinforced twist-resistant arm to make the jack portable.
When it comes to features, the Arcan ALJ3T is loaded. For example, it has a dual-pimp piston with a wide lifting range of 3.4 to 19.4 inches, making it a low profile jack. The dual-pump piston allows for quick rising action so you can get your vehicle up to the maximum height in only 12 pumps. One of the noticeable additions to this model is the dust shields that make hydraulic pollution impossible.
Like most floor jacks, a rubber saddle sits atop the lifting arm to protect the underside of your vehicle while the two-piece handle is padded to protect your arms. When storing the floor jack, you can disassemble the handle for easy storage.
To improve mobility around the work area, the jack has two fixed wheels on the front and swivel casters on its rear side. They give stability to the floor jack as well as make it easy to move on rough surfaces. If you’re concerned about its safety mechanism, the overload and bypass valves aid minimize the risks of over-pumping and overloading of the floor jack.
Additionally, this floor jack comes with a quick-lock feature which facilitates the engagement and disengagement of the handle valves on the floor jack. Overall, the Arcan ALJ3T was built for toughness and will get the job done.
- Low profile
- Easy to use
2. Pittsburgh Automotive 3-Ton Heavy Duty Floor Jack
This jack from Pittsburgh is one of the best floor jacks you can find as it offers plenty value for money. It is packed with many features that are common only to hydraulic floor jacks, yet it has a modest price tag.
It comes with a rapid pump which is also made of steel, indicating that it is sturdy as it has a capacity of three tons. Whether your vehicle is a truck or a car, you will definitely love this heavy-duty jack as it will fit perfectly under your vehicle. It also has metal wheels giving it the flexibility to roll efficiently, so you can move it from one place to another.
Sporting a low profile design with the lifting saddle at only 2 7/8 inches, this steel floor jack has a maximum lift of 19 ¾ inches. The rapid pump makes it easier to reach the maximum height for cars. Although Pittsburgh pitched this jack as needing only 3 ½ pumps, tests suggest that 4 full pumps are more accurate.
Going further, the jack wins extra points on durability and ease of installment. The extra-wide front steel wheels keep it stable and help it bear the load better if you’re working on softer surfaces like asphalt and tiles. The lifting handle follows the popular 2-piece design which you will find helpful when you want to transport it into the back of your car or the storage compartment of your truck. Overall, this is a strong jack as it allows you to do anything.
- Ultra low profile but lifts very high
- Sturdy and three-ton capacity
- Rapid pump and metal wheels
- Squeaks loudly when operated
3. Blackhawk B6350 Fast Lift Service Jack – 3.5 Ton Capacity
Coming third on the list is the Blackhawk B6350, a professional jack suitable for the racing industry. At 90 pounds, it is a bit heavier than its contenders on the list. Made of high-grade steel for durability, this jack’s rated capacity of 7,000 pounds (3.5 tons) makes it the go-to automotive tool for lifting heavy vehicles with ease.
The Blackhawk B6350 has some great features that warrant discussion and earns it a place on the list. One of them is the bypass device which prevents damage from over-pumping. There are also frames rolled on the side for extra strength while the built-in internal safety valve will keep you safe underneath the car.
Going further, the padded saddle and rear caster are also attractive points of this jack as they can swivel, meaning it will be easy for you to adjust the jack to your preferred position. The rubber padding on the saddle is to protect your vehicle’s paint job so that no scratches are made through contact.
A close look at the jack will show that it is a combination of aluminum and steel which were well used to ensure heavy-duty construction, giving reassurance that the jack offers safe use and long-term durability as well. As per its lifting functionality, the Blackhawk B5350 does incredibly well as can be used for small cars and unloaded trailers or trucks. Although it can lift load very quickly, it can also sense when the load brings pressure after which it slows down the lifting rate.
Overall, this jack is a solid tool that offers real value for money in terms of its build, features, and durability.
- Easy to use
- High-lifting capacity
- Strong rubber saddle
- May require hydraulic fluid before initial use
- A bit heavier than other jacks
- Rubber pads can easily stray from the initial position
4. Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
Liftmaster is a recognised manufacturer of ultra-grade hydraulic floor jacks and the Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack is one of their most incredible offerings. It doesn’t just sport a simple look; it is also affordable and can work well for both lifted trucks and lowered vehicles.
One of the first things you’d notice about this is that it is easy to use, even for those who have never owned a floor jack before. It fits easily under your low vehicle and has a low dual pump for fast and easy lifting. Its minimum lift is 3 inches and will slide under the most lowered cars, while the maximum height is 1.7 inches which may not be enough to have a lifted truck. It can reach full height in just about 8 pumps.
Coming to its features, the jack uses the traditional pump action that makes it easy to lift. The saddle is coated with a thick anti-slip rubber that will make it safe when lifting a low profile vehicle. It also boasts a convenient handle no thanks to the foam bumper which feels good in the hands. The body itself is constructed from high-quality steel which is tough and rugged.
Overall, this is a great choice for those who want to own a floor jack but are on a tight budget. It does everything other jacks can, except that it doesn’t have the build construction or weight capacity that most heavy-duty floor jacks have.
- Minimalist design
- Easy to use
- Strong rubber pad
- Holds height for long time without issue
- Solid build
- Cannot be used for heavy-duty lifting
- Unclear instructions
5. Arcan 3 Ton Professional Grade Aluminium and Steel Service Jack
As the name indicates, the Arcan 3 Ton Professional Grade Jack combines the strength of steel with lightweight benefits of aluminum eel which gives it a solid build. It features a low profile design with dual pump design pistons for a rapid lifting. It has a maximum lifting height of 18.6 inches with a minimum of 4 inches which is suitable for use on different types of vehicles.
Despite being a heavy duty tool with a capacity of 3.0 tons, the jack weighs only 58.3 pounds, making it one of the lightest jacks you on the list. Coupled with the front steel wheels and rear swivel caster wheels and you will be able to transport the jack from one place to another with ease. The 2 built-in side carrying handles enhance easy carrying while the rubber saddle pad which it comes with will protect the underside of the vehicle while outlasting foam pads.
To alleviate worries about your safety while using this jack, there’s a built-in safety overload system that prevents over-pumping beyond its rated capacity. The manufacturer says nothing about its ability to quickly lift, but you should be able to get it up to the chassis with about 5 pumps.
There’s confusion about the difference between this jack and the Arcan ALJ3T since they both have 3.0-ton capacity. Apart from differences in their design, this jack is a combination of aluminum and steel while the ALJ3T is made only of aluminum.
- Good and steady lift
- Not fast-lifting