- The Process Of Installing Dash Cam To Your Jeep Wrangler
You’ll never know when a camera is in need. With everything going around us, people are compelled to record everything, whether a vacation in a beautiful country or even a small activity like going to the dentist or having your lunch out. It is the reason why different cameras are produced every year.
In line with this is the increasing number of vehicular accidents. And the same with every other aspect, a camera installed in a car is a must and it has its many benefits.
A dashboard camera, or a dashcam as it is commonly known today, has become popular as years go by. This type of camera is installed on the dashboard of your car. It records everything, such as sounds and images when you are driving.
With this, you can actually solve a lot of problems along the way. For example, if you get into an accident, you can totally review the incident in your dashcam — given that it did not break along the accident.
Aside from that, the video footage can be used as evidence for whatever legal purposes. Not only this, you can even capture excellent parts of your travel; it could be a great view ahead while you are driving.
Parents who are worried about their children’s safety while driving the car can also benefit from this. As mentioned, it is beneficial and if you have not yet installed one in your vehicle, now is the right time to do so.
If we talk about a good investment for your Jeep Wrangler, then installing a dashboard camera in it is the utmost priority.
You will never know when you need to record a time, event, or even place. Not to mention that Jeep Wrangler is suitable for outdoor activities, camping and the likes. These events are worth recording.
Nothing is better than being relaxed while driving down the road towards your destination. You don’t need to worry about the thought of recording the road and the scenery ahead.
Now, if you are looking for ways to install a dashboard camera in your Jeep Wrangler, there are easy steps that can guide you how.
The Process Of Installing Dash Cam To Your Jeep Wrangler
If you are doubtful about getting a dash cam because you have no idea how to install one, here is a step-by-step guide that will help you.
Step 1. Know where is the ideal location and position to install your camera.
The usual way is on the dashboard. However, many car owners also put their cameras in the rear end. It is to ensure that both the front and the back are being recorded. It entirely depends on the driver’s preferences.
If you’re a person who always opt to be certain, it is suggested that you put a camera both in front and rear.
In the front area, most people put it behind the rear-view mirror. In that case, it won’t be blocking any view.
Also, be careful not to place it way too high or way too low. Always ensure the right position to place it in order to capture the road properly.
If you put it way too low, the road will not be captured entirely and will focus more on the car’s hood. If it is placed too high, the camera might not capture the road, and you will have a hard time if you will need it later for an accident or evidence.
The dashboard camera must come with a suction mount cup. Since it will have to stick in the windshield, it is suggested to use the 3M mount because it is way cleaner while installing it.
Make sure to wipe clean the windshield to ensure the 3M mount will stick; otherwise, it will be difficult for you to stick it again. That will take like thirty seconds to one minute for the 3M mount to stick in the windshield.
Make sure that the camera is placed properly so it won’t fall anytime soon during your travel. If the position of the dashboard camera is set, then we will proceed with the second step.
Step 2. Locate where your fuse box is.
Since we need to power up the camera, you need to find where the fuse box is located. It can be either interior or underhood. The interior fuse box can be found underneath the dashboard on the driver’s side.
Step 3. Run the wire from the camera to the fuse box.
Plug the wire from the camera to the fuse box to get its power on. The wire is easy to handle.
If you are a type of person who’s not comfortable with the cables just dangling anywhere, you can just tuck the power cable into the jeep’s headliners to hide it.
If the wire is too long, which most of the dashcam is, you can use a zip lock or tie the excess wire and then tuck it somewhere in the car to avoid obstructing the view.
If the camera is in place already and it is plugged in the power source, the cameras are good to go.
Step 4. Update the time, date, and language of the dash cam.
Once it is all set, you can start updating the inputs of the dash cam such as the date, the time and as well as the language. Once it is turned on, consider the following tips:
- Make sure to always check the installation.
- Double-check the wires.
- Recheck if it was plugged nicely, placed correctly, and if the cables were hidden neatly.
Step 5. Go for a test drive with your newly installed dash cam.
Doing a test drive to check the dashboard camera’s installation is an excellent way to finish the installation.
Now, you can drive peacefully, knowing your driving time is captured. A lot of vehicular accidents involve hit and run And it’s easy to accuse someone on the scene.But with a dashboard camera, you can never go wrong with the concrete evidence it can provide to you.
You can also record beautiful road scenery in your travels. Indeed, a dashboard camera is a necessity when you have a car.
Install one directly in your Jeep Wrangler and reap the benefits of having one.